Comments for CNC Machinist Traininghttps://cncmachinisttraining.comTips and Training Info for CNC MachinistsTue, 02 Jun 2015 00:54:28 +0000hourly1https://wordpress.org/?v=4.9.9Comment on Bridgeport CNC Conversion – Is It Worth It? by jeremyhttps://cncmachinisttraining.com/2015/03/15/bridgeport-cnc-conversion-is-it-worth-it/#comment-60Tue, 02 Jun 2015 00:54:28 +0000http://cncmachinisttraining.com/?p=643#comment-60hello, i purchased a bridgeport series 1 with servos on all 3 axis and an anilam 300m controller and want to convert it over to a mach 4 pc based system. I do not do production runs but have built a 3 axis 4×8 wood working cnc a few years back so i am somewhat familiar with a lot of things but now want to give the real machine a go. I would like to know if there is any documentation out there to show exactly how to convert this over. Any help wold be appreciated. Thanks.]]>Comment on Manual CNC Programming – Pros & Cons by David Wellshttps://cncmachinisttraining.com/2014/01/09/manual-cnc-programming-pros-cons/#comment-57Tue, 12 May 2015 20:59:35 +0000http://cncmachinisttraining.com/?p=514#comment-57Do you know of any place in the Wisconsin/Illinois area that has classroom training courses for m code programming?]]>Comment on Used CNC Milling Machines – What To Look For by miladhttps://cncmachinisttraining.com/2013/03/22/used-cnc-milling-machines-what-to-look-for/#comment-41Tue, 28 Apr 2015 06:13:58 +0000http://cncmachinisttraining.com/?p=163#comment-41hello dear
good day
i want used cnc machine
if you can find used machine in china
we can cooperate together
i am seller cnc machine in iran
i have good idea
i can sell japanes and europe cnc machine in iran
please find for me
its good job
i waiting for you
thanks
regards]]>
Comment on Used CNC Milling Machines – What To Look For by Bridgeport CNC Conversion Worth It | CNC Machinist Traininghttps://cncmachinisttraining.com/2013/03/22/used-cnc-milling-machines-what-to-look-for/#comment-40Mon, 16 Mar 2015 01:42:32 +0000http://cncmachinisttraining.com/?p=163#comment-40[…] depends on how much you want to spend and how big of a machine you want. $20k can get you a used CNC mill, but it will probably be 15+ years old and will need a lot of maintenance sooner rather than later. […]]]>Comment on Roll Forming Taps Vs. Cutting Thread Taps On A CNC Mill by tomstarkhttps://cncmachinisttraining.com/2013/04/02/roll-forming-taps-vs-cutting-thread-taps-on-a-cnc-mill/#comment-44Sun, 15 Feb 2015 21:41:29 +0000http://cncmachinisttraining.com/?p=221#comment-44The drill size will need to be bigger and more precise since it is “forming” the threads with the material already there. If there’s too much material then the tap will snap off. Look for a form tap drill chart to find the correct size. I usually end up using a form tap on blind hole threads that are 1/4″ inch and smaller in steels and stainless. As far as speeds, you can go just as fast or faster than cut taps.]]>Comment on Roll Forming Taps Vs. Cutting Thread Taps On A CNC Mill by Ling Kwong Shinghttps://cncmachinisttraining.com/2013/04/02/roll-forming-taps-vs-cutting-thread-taps-on-a-cnc-mill/#comment-43Fri, 13 Feb 2015 03:14:02 +0000http://cncmachinisttraining.com/?p=221#comment-43Is there any special requirement on (tap hole size, tap hole shape, tap hole material, tapping speed, etc)the process of Roll Forming Tap?]]>Comment on How To Read A Part Blueprint For CNC Machinists by Youssefhttps://cncmachinisttraining.com/2013/11/11/how-to-read-a-part-blueprint-for-cnc-machinists/#comment-54Sat, 10 Jan 2015 18:26:27 +0000http://cncmachinisttraining.com/?p=451#comment-54very good explanation for this course for how to read a blueprint, thank you]]>Comment on Machinery’s Handbook – Every Day Machinist Tool by Machinist Toolbox - What To Buy? | CNC Machinist Traininghttps://cncmachinisttraining.com/2013/04/24/machinerys-handbook-every-day-machinist-tool/#comment-45Thu, 18 Dec 2014 03:16:12 +0000http://cncmachinisttraining.com/?p=251#comment-45[…] Are you new to the Machining industry or considering a career in this field of manufacturing? A toolbox is one of the first things that you should buy. It’s where you will keep most if not all of your tools, personal inspection equipment, and books/manuals such as the Machinery’s handbook. […]]]>Comment on Contact by tomstarkhttps://cncmachinisttraining.com/contact/#comment-5Thu, 13 Nov 2014 23:26:24 +0000http://cncmachinisttraining.com/?page_id=34#comment-5Which College are you referring to? More than likely, you will have to call and ask the school.]]>Comment on Contact by maurice guyahttps://cncmachinisttraining.com/contact/#comment-4Thu, 13 Nov 2014 16:14:01 +0000http://cncmachinisttraining.com/?page_id=34#comment-4Does the college admit international students?]]>